Acquiring The Log - Sony MAV-70 Manual

1-5. Acquiring the Log

1-5. Acquiring the Log
This section describes how to acquire the log using a macro function of Tera Term.
n
Be sure to put the boards into the STOP state before acquiring the log on the ENC and DEC boards.
Preparation (For except DP-269 board)
1. Remove ornamental panel A. (Refer to Section 2-2-1)
2. Open "Service: Board Slot n" screen from the menu.
(For more details of the operation, refer to the Operation Manual.)
Exit Service : Board Slot 1 ENC
>Param
EXT232C -1- -2- -3- -4- -5- -6- -7- -8-
Rdy Rdy Rdy Rdy Rdy Rdy Rdy Rdy
3. Select "EXT232C" using the
using the and
n
For SY-253 board, press the [ENTER] button several times and select the CPU to be used.
Exit Service : Board Slot 7 SY DPC
>Param
-1- -2- -3- -4- -5- -6- *7* -8-
EXT232C
Rdy Rdy Rdy Rdy Rdy Rdy Rdy Rdy
4. Connect the MAV-70 to a personal computer and set the communication rate. (Refer to Section 1-2.)
5. Set the S3 switch on the front panel to INT.
Preparation (For DP-269 board)
1. Remove ornamental panel A. (Refer to Section 2-2-1.)
2. Connect the MAV-70 to a personal computer and set the communication rate. (Refer to Section 1-2.)
3. Set the S3 switch on the front panel to EXT.
1-10 (E)
and buttons and then select the board (slot No.) to be treated
buttons. Press the [ENTER] button.
MAV-70