Symbols; Designations - Bosch rexroth BS 1 Series Assembly Instructions Manual

Hide thumbs Also See for rexroth BS 1 Series:
Table of Contents

Advertisement

6/40
About this documentation
Bosch Rexroth AG, MIT: BS 1/..., 3 842 563 815/2021-11
Safety instructions are set out as follows:
Type and source of danger!
Consequences of non-compliance
Measures to prevent danger
...
• Safety sign: Points out the danger
• Signal word: Indicates the severity of the danger
• Type and source of danger: Indicates the type and source of the danger
• Consequences: Describes the consequences of non-compliance
• Prevention: States how the danger can be avoided
Table 2: Risk classes according to ANSI Z535.6-2006
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTICE
1.3.2

Symbols

The following symbols indicate important information that is not safety-relevant
but increases the comprehensibility of the documentation.
Table 3: Meaning of the symbols
Symbol
Meaning
If this information is not observed, the product cannot be used and/or
operated as designed.
Single, independent action
1.
Numbered steps:
2.
The numbers indicate that the action steps are subsequent.
1.3.3

Designations

This document uses the following designations:
Table 4: Designations
Designation
Meaning
BS 1
Belt section from the Rexroth TS 1 transfer system,
for longitudinal and transverse conveying of WT 1 workpiece pallets.
BS 1/T
Belt section from the Rexroth TS 1 transfer system,
to drive a subsequent curve (KE 1/O).
BS 1/M
Belt section from the Rexroth TS 1 transfer system,
with the motor in the center of the belt section.
BS 1/S
Belt section from the Rexroth TS 1 transfer system,
segmented belt section with the possibility of up to 3 additional cuts in
the longitudinal profile
SIGNAL WORD
Meaning
Indicates a hazardous situation that will result in serious
injury or death if not avoided.
Indicates a hazardous situation that may result in serious
injury or death if not avoided.
Indicates a hazardous situation that may result in minor to
moderate injury if not avoided.
Property damage: The product or the surrounding area could
get damaged.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents