Advertisement
Protective Housings Against Laser Exposure
Even when the protective housings are removed for servicing, laser beams will never leak
out from the machine unless the optical path is intentionally changed. However, if the optical
path is changed inadvertently during optics-related procedures, the service engineer or other
people around the machine may be possibly exposed to laser radiation. During optics-
related procedures, carefully perform the procedures while checking the instructions
described in this manual, and after the procedures are completed, restore the protective
housings removed back exactly where they were.
Protective Housing of the Machine
The removable protective housings of the machine are illustrated below. The four covers
marked by
Upper left-hand side cover
Lower left-hand side cover
Left-hand inner cover
Upper front cover
Lower front cover
009-058-00
10.10.2000 FM2732
in the illustration below are protective housings against laser exposure.
Light protect plate
CR-IR347 Service Manual
HHS label #2
HHS label #2
Right-hand inner cover
0.7
Upper rear cover
Lower rear cover
Upper right-hand side cover
Lower right-hand side cover
FR7H0001.EPS
0.7
Advertisement
