Advertisement
1.
Getting Started
Scope
This Service Manual is applicable to Fuji Computed Radiography CR-IR347 and CR-IR347P.
The machine is categorized as Class 1 according to IEC classification.
NOTES
• Differences between the CR-IR347 and CR-IR347P are as follows.
The CR-IR347 may be connected to the ID-T741.
The CR-IR347P may be connected to the CR-IR348CL and ID-T741.
• Units with serial number #5001 or later are called "CR-IR347P".
Notation of Unit Symbols
For notation of unit symbols, metric units set forth in the International Systems of Units (SI)
are used, as a rule. However, metric units that are allowed in the Measurement Law, not in
the SI, are used in some cases.
Notation of Warnings, Cautions, etc.
WARNING
Used when death or serious injury may occur if the instruction is not observed.
CAUTION
Used when minor or medium levels of physical injury may be incurred if the instruction is
not observed.
Also used when the machine may suffer serious trouble (such as unrecoverable or
difficult-to-recover trouble).
INSTRUCTION
Used when the machine may suffer damage, or any failure or malfunction may occur, if
the instruction is not observed.
NOTE
Used to indicate the matters that need attention during steps of the procedure.
REFERENCE
Used to indicate terminology or supplemental explanations.
Used to indicate the chapter or section you should refer to.
Notation in the Manual
In this service manual, the term "CR-IR347" represents the "FCR5000MA".
009-058-02
009-058-00
08.30.2001 FM3142
10.10.2000 FM2732
CR-IR347 Service Manual
0.2
0.2
Advertisement
