Panasonic CZ-64ESMC3 Installation Instructions Manual page 22

Test Operation
Group
3
Select the operation target.
Press
4
5
Finish the test operation.
Perform step 1 and 2, and then select [OFF] in step 4. ([TEST] display
disappears.)
Attention
Do not use this mode for purposes other than the test operation. (To prevent
overload of the units)
Read the installation instructions supplied with the units.
Any of the Heat, Cool and Fan operations can only be performed.
Temperature cannot be changed.
Outdoor units do not operate for approx. 3 minutes after the power is turned
on or operation is stopped.
(Press
22
(EN)
to select the zone.
to fi nish.)
(continued)
Displays the
selected
setting
target.