12.5 Assembling Accessories; 12.6 Storing The Device; 13. Disposal - Silvercrest SSM 1000 A2 Operating Instructions Manual

Pressure valve
1. Figure F: on the top of the lid 5: pull
the pressure valve 1 out upwards.
2. Figure G: on the underside of the
lid 5: pull off the safety filter 26. (The
safety filter 26 fits very tightly. Remov-
ing it is difficult.)
3. Clean both parts by hand using a mild
detergent and allow them to dry. Use a
small brush if necessary for the small
spaces in between.
NOTE: if the inside of the pressure valve 1
is dirty, clean it with a damp cloth. If soiled
with stubborn dirt, clean the inside of the
pressure valve 1 under running water with a
small brush.

12.5 Assembling accessories

1. Allow all parts to dry completely before
reassembling them.
2. Reinsert the pressure valve 1 and safety
filter 26.
3. Place the sealing ring 25 back on the
underside of the lid 5. Check:
- that all parts are clean,
- that the silicone plug in the middle of
the sealing ring 25 sits precisely on
the holder 28,
- that the seal is fully in contact all the
way around.
4. Place the condensed water tank 12
back into the holder 18.
1

12.6 Storing the device

DANGER for children!
Keep the device out of the reach of chil-
dren.
• Allow all parts to dry completely before
you put away the device for storage.
• Do not close the device when you store it.
• Store the device somewhere dry, dust-
free and frost-free.

13. Disposal

This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances.
This recycling symbol marks
e.g. an object or parts of the
material as valuable for recy-
cling. Recycling helps to re-
duce the consumption of raw
materials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
71
GB