Word Units - Toshiba V Series User Manual

Chapter 5 Application Interface
5
42
A list of accessible information on MMS command messages and response messages
and message types is shown in Table 5-1.
Table 5-1 Information Accessible by TOSDIC-CIE 6000/5000 System
Item
Tag information table MMS RC/MMS RR
read
Tag information write (W) MMS WC/MMS WR
Tag information write (B) MMS WC/MMS WR
Tag information write (D) MMS WC/MMS WR
PCS parameter read MMS RC/MMS RR
PCS parameter (W) write MMS WC/MMS WR
PCS parameter (B) write MMS WC/MMS WR
PCS parameter (D) write MMS WC/MMS WR
Polynomial line table MMS RC/MMS RR
read
Polynomial line table MMS WC/MMS WR
write
Station SYS information MMS RC/MMS RR
details
Calendar setting MMS IC/MMS IR
DPCS parameter read MMS RC/MMS RR
DPCS parameter write MMS WC/MMS WR
OIS parameter read MMS RC/MMS RR
OIS parameter write MMS WC/MMS WR
MV value write (%MV) MMS WC/MMS WR
MV value write (∆MV) MMS WC/MMS WR
The meanings of the functions and parameters for each message are described in the
following pages.
Header
Tag parameter read by specifying a terminal
unit (PCS, DPCS, SIF5300, TIF)
Tag information write in word (W) units (PCS,
DPCS, SIF5300, TIF)
Tag information write in bit (B) units (PCS,
DPCS, SIF5300, TIF)
Tag information write in double word (D) units
(PCS, DPCS, SIF5300, TIF)
PCS parameters read: XPR, XPW, XPF, XPT,
XTS, XTR, XTH, XTU, XCP, XCS, XCM, FMT,
STL
PCS parameters (XPW, XTS, etc.) write in

word units

PCS parameters (XPW, XTS, etc.) write in bit
units
PCS parameter (XPR) write in double word
units
Polynomial line table number data read (PCS,
DPCS)
Polynomial line table number write (PCS,
DPCS)
PCS detailed station SYS information read
(serial bus, parallel bus)
Date and time correction
DPCS parameter read
DPCS parameter write
OIS parameter read
OIS parameter write
MV (%MV) value write in controller
MV (∆MV) value write in controller
model 3000 ADMAP-5M AN712 Module User's Manual
Description