An712 Module Setting And Operation - Toshiba V Series User Manual

Chapter 3 Settings
3.2.2

AN712 module setting and operation

3
14
Register transmission rates (high, medium low), transmitting nodes (AN712 modules for
scan transmission), and output (controller to refresh scan transmission area) for the
blocks 0 to 1024 of scan transmission area of the ADMAP-5MLAN network.
(1) Scan transmission block registration
Select [Scan memory] under [ADMAP-5MLAN] on Product View, and choose
[Transmission block].
Or, [Scan block] may be double-clicked to open the scan transmission block screen.
The screen above shows all the scan transmission blocks in numerical order. [Node No.
(C)] under [Display Order] may be selected to show nodes in numerical order, or [Valid
block only (V)] may be selected under [Display Block] to display only the scan
transmission blocks allocated as transmission blocks.
model 3000 ADMAP-5M AN712 Module User's Manual