Table of Contents
Advertisement
User's Manual
Notice:
If you encounter conflicts with other already installed external drivers
that use bidirectional communication on the Centronics port or with
drivers of other dedicated Windows printers used in parallel with this
printer (conflicts like the failure to establish communication between the
Printer Driver and the printer), remove these from Windows and
reinstall the PrintPartner 10V/14V Printer Driver.
Printer Driver for Windows 3.1/3.11
To install the Windows 3.1/3.11 Printer Driver, follow these steps:
1. Start Windows.
2. Insert the PrintPartner 10V/14V Printer Driver disk into the 3.5 inch
floppy disk drive of your computer.
3. From the Windows Program Manager, select the "File" menu and
choose the "Run" command.
4. Type "A:\inst_xxx" or "B:\inst_xxx" and press the "Enter" key.
Printer Driver for Windows 95
The Windows printer driver can be installed by either of the following
two methods. The first one applies when Windows 95 is started with the
printer ready and the second one applies when the printer is on after
Windows 95 has been started.
Plug and Play Printer Detection
1. Windows 95 automatically detects the printer at installation time or
during the boot process.
2. Plug and Play detection code will prompt the user for the appropriate
files, if they are not already resident in the Windows directory, by
displaying the "New Hardware Found" dialog box.
Installing the Printer Driver
1-17
GETTING
STARTED
Advertisement
Table of Contents
