Table of Contents
Advertisement
2600-00CTEIGAA
Ver.
ANNEX E. Pressure Terminal Assembly
Fixing Pressure Terminal (Handheld Compressor)
1) Insert the conductor of the cable with the sheath stripped to the internal end of pressure terminal. For a
ring type pressure terminal, push it in until the conduct comes out 0.04 in. (1 mm) from the end of the
terminal.
2) From the holes of handheld compressor, select one that fits to the pressure terminal.
3) Insert the pressure terminal to the selected hole.
4) Fix the pressure terminal and cable temporarily so the position can be changed later by pressing the
compressor.
E-8
4.0
Figure E.6 Fixing Pressure Terminal_Handheld Compressor (1)
© SAMSUNG Electronics Co., Ltd.
Advertisement
Table of Contents
