FLEXIDOME panoramic 5100i IR
7.
Notice!
i
To ensure proper watertight installation, the cable entry marked with PoE needs to be used
for RJ45/PoE cable.
8.
9.
10. If required, make a loop with the cable on the hooks of the mounting plate.
Bosch Security Systems B.V.
Connect the network cable to the network connector in the camera.
If used, connect the audio and alarm wires to the 8-pin Audio and I/O connector. The
camera Audio input only accepts line level input. Direct connection of a passive
microphone input is not supported.
Use a micro HDMI connector in order to connect the camera directly to a Public View
Monitor with HDMI input for retail usage or for local video display.
x2
Installation manual
Installation | en
2022-01 | V01 | F.01U.385.630
17