Preparation; Network And Poe - Bosch FLEXIDOME panoramic 5100i IR Installation Manual

FLEXIDOME panoramic 5100i IR
4.3

Preparation

Before installation, prepare and plan the installation process and materials needed.
Pre-requisites
–
–
4.4

Network and PoE

Notice!
i
Use only PoE IEEE 802.3at / 802.3af Type 1, Class 3 approved devices.
Power-over-Ethernet (PoE) can be connected at the same time as a 24 VAC and 12 VDC power
supply. If auxiliary power and PoE is applied simultaneously, the camera draws its power from
PoE by default, and seamlessly switches to auxiliary input if PoE fails.
When PoE returns, the camera seamlessly switches back to PoE as its default power source.
Cables
For cable requirements, refer to Wiring the camera base.
Bosch Security Systems B.V.
Quantity Component
1 Safety information
3 Identification labels
Remove the components from the box. Make sure that all parts are included and are not
damaged.
The necessary material and equipment:
– 4 screws M4 or no. 7.
– Appropriate size power drill.
– Screwdriver and bit holder and TR20 bit, or use the provided TR20 Allen key.
– microSD card (optional)
Installation manual
Planning information | en
2022-01 | V01 | F.01U.385.630
11