Yamaha RM Series Manual page 33

[TOOLS]
[SITE SURVEY]
• Allows the access point to measure the signal strength in the installation environment and the channel usage status by clicking the
[START SURVEY] button.
IMPORTANT: If radio frequency interference occurs, there may be no sound from the microphones or the microphone connection
may be unexpectedly cut. We recommend thoroughly examining the environment before installation.
• Allows you to check the measurement results and the number of microphones that can be used in the installation environment, by
clicking the [RSSI SCAN MODE] button. For highly accurate measurements, make sure that all nearby wireless microphones and
other DECT devices are operational. In addition, it is recommended to measure for several hours under typical usage conditions in
order to obtain accurate results. The values beside "High Density Audio Mode" and "High Quality Audio Mode" refer to the maximum
number of microphones that can be used in each mode.
RM Series Wireless Microphone System Reference Manual
33