Yamaha RM Series Manual page 13

[Bottom panel]
1 Network port indicators (Dante/PoE port)
Network port indicator
Left indicator lit green
Left indicator flashes green
Left indicator unlit
Right indicator lit green
Right indicator flashes green
Right indicator flashes orange
NOTICE: • When disconnecting the LAN cable from the Dante/PoE port, wait at least five seconds before reconnecting the
cable. Otherwise, damage or malfunctions may result.
• With a Dante network, do not use the EEE function* of the network switch. Although mutual power consumption
settings are automatically adjusted between switches that support the EEE function, some switches do not perform
that properly. As a result, the switch's EEE function may be enabled inappropriately in the Dante network, possibly
degrading clock synchronization performance and interrupting audio. Therefore, please note the following.
- When using managed switches, turn off the EEE function on all ports used for Dante. Do not use a switch that does
not allow the EEE function to be turned off.
- When using unmanaged switches, do not use switches that support the EEE function. In such switches, the EEE
function cannot be turned off.
* EEE (Energy-Efficient Ethernet) function: Technology that reduces the power consumption of Ethernet devices
during periods of low network traffic; also known as Green Ethernet or IEEE802.3az.
1
RM Series Wireless Microphone System Reference Manual
Unit status
Link up
Transferring data
Link down
Operating on word clock of peripheral device (leader)
Acting as word-clock leader
Word clock unlocked
13