Yamaha RM Series Manual page 28

- [Enable PEQ]
Allows you to select whether to enable PEQ (Parametric EQ). This is effective when used in combination with a processor other
than RM-CR.
- [Band], [Type], [Q], [Freq.], [Gain], [Bypass]
Allows you to specify PEQ settings for each of the six bands.
For [Type] under "Band A" or "Band F", select one of the following: PEQ, L.SHELF-6dB/Oct, L.SHELF-12dB/Oct, H.SHELF-6dB/
Oct, H.SHELF-12dB/Oct, HPF, LPF.
• Allows you to cancel pairing by clicking (trash can).
RM Series Wireless Microphone System Reference Manual
28