Monitoring Environment; Table 10-1 Parameters In The Environment Monitor Dialog Box - Huawei BTS3900 GSM Commissioning Manual

BTS3900 GSM
Commissioning Guide
l
Air-Conditioner Alarm
The air-conditioner alarm is generated when the air-conditioner is not running properly or the
AC power supply is not normal. This is a major alarm.
Door Status Alarm
The door status alarm is an environment alarm generated when the door of the equipment room
or the door of the cabinet is opened. This is a major alarm.
Burglar Alarm
The burglar alarm is generated when the infrared alarm or door status alarm occurs. This is a
critical alarm.

10.2 Monitoring Environment

This function is performed to monitor and manage the environment parameters in a site. By
performing this function, you can view the current temperature and humidity and set the
temperature and humidity thresholds. The BTS can run normally in a safe and suitable site
environment. You can also clear a burglar alarm or a smoke alarm and disable an EAC alarm.
Prerequisite
You have logged in to the BTS through the Site Maintenance Terminal.
Context
Table 10-1

Table 10-1 Parameters in the Environment Monitor dialog box

Parameter
Clear Robbery
Alarm
Set Temperature
and Humidity
Threshold
Relay Operation
Issue 03 (2008-07-15)
The low humidity alarm is generated when the environment humidity is lower than the
predefined lower threshold of the humidity.
describes the parameters.
Meaning
Clearing the infrared alarm and the door status alarm
Set the upper and lower thresholds of temperature and
humidity. Based on the thresholds, the alarm box reports
a temperature alarm and a humidity alarm.
Control the relay status. The relay is used to start or close
the refrigeration device, heating device, dehumidifier,
humidifier, fire extinguisher, and anti-burglar device.
The default state is Close.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
10 Checking the BTS3900 Environment
Value
Range
-
-
-
10-3