Siemens MOBILETT XP Digital Maintenance Instruction page 34

34
Test report/
Technical safety checks
5.1 Function of the emergency-stop
switch
5.2 Are the warning devices functioning
properly?
5.3. Do all system movements stop prop-
erly in their end positions?
5.4 Does the collision protection device
stop all system movements properly (e.g.
collision protection)?
5.5. Are all safety distances (wall, floor,
ceiling) met or ensured by other appropri-
ate measures (such as light barriers)?
5.6. Are the other safety shutdown
devices functioning properly (e.g. safety
floor plate)?
5.7 Are the positions of the table and sys-
tem reproducible (e.g. zero positions,
layer height, etc.)?
MOBILETT XP Digital
General maintenance information
SPR8-230.831.30.03.02
11.05
Maintenance instructions for the
check/comments
n.a.
3.3.3 Check of the radiation indicator,
checks:
SIE Radiation indicator
SIE Ready indicator
SIE Acoustic signal
n.a.
n.a.
n.a.
n.a.
n.a.
Page 34 of 74
CS SD 24
Siemens AG
Medical Solutions