System Connection Example - Sony BKS-R1608 Operation Manual

System Connection Example

Control
terminal
Primary
station
Level 1
DVS-V6464B Video
Routing Switcher (M)
Video
Secondary
station
Source
VTR
max.
128
units
Only one of the REMOTE 1 connectors on a routing switcher used as a secondary station will be active.
1) Communication software or Windows 3.1 should be installed in the computer. If Windows 95/NT using terminal mode is installed, the
function buttons do not function.
2) (M): The M/S select switch on the CPU board of the routing switcher is set to M.
3) (S): The M/S select switch on the CPU board of the routing switcher is set to S.
4) Connect 75-ohm terminators to the T-bridge connected to the last unit of the S-BUS data link and to the unused REMOTE 1 connectors.
Computer 1)
2)
Level 1
Level 1
DVS-V3232B DVS-A3232 Audio
Video Routing Routing Switcher
3)
Switcher (S) 2) (S)
Video
Audio
Level 1
BKS-R3210
BKS-R3209
BKS-R3209
BKS-R3209
Example for basic configuration of the S-BUS data link
Destination VTR
Video
Video
Audio
Time code
Level 1 Level 1
DVS-A3232 Audio
Routing switcher
Routing Switcher
3)
(S)
Time code
Level 1
BKS-R1607
BKS-R3209
BKS-R3209
BKS-R3209
S-BUS line
Signal
RS-232C
T Bridge (A)
T bridge (B)
4)
75-ohm terminator
Matrix level
BKS-R1607
BKS-R1608
BKS-R3209
BKS-R3209
5 (E)