Accessories - Bosch AVENAR 4000 FAP-425-O User Manual

AVENAR detector 4000
–
–
–
–
–
–
–
–
–
–
–
–
–
For DO detectors, note:
Notice!
i
The device cannot be used with the FPA-5000 type A panel controller.
2.5

Accessories

FLM-420-EOL4W-S
The FLM-420-EOL4W-S is a 4 wire EOL module.
Bosch Sicherheitssysteme GmbH
Increased detection and false alarm security thanks to evaluation of the temporal
behavior of fire and disturbance variables.
Activation of a remote indicator is possible.
Optional mechanical removal safeguard (can be activated/deactivated).
Dust-resistant labyrinth and cap construction.
Every detector has a Chamber Maid Plug (a cleaning opening with a plug) for blowing out
the optical chamber with compressed air (not required for the FAH-425-T-R Heat
Detector).
For connecting to fire panels with extended range of LSN features.
In classic mode, can be connected to the BZ 500 LSN, UEZ 2000 LSN and UGM 2020 LSN
fire panels and to other panels or their receiver modules with identical connection
properties but with the existing LSN system limits.
It is possible to read out the serial number, contamination level (for the O sensor),
operating hours, EMC strength level and current analog values for each configured
detector via LSN.
Use of shielded and unshielded cables.
The LSN improved version line technology supports the connection of up to 254 FAP-425/
FAH-425 series detectors per loop or stub (please observe national regulations in this
regard).
Flexible network structures without additional elements are possible (T-tapping is not
feasible with detector versions without rotaries).
Automatic or manual detector addressing selectable.
Compliant with EN 54, EN 50131 and VdS guidelines.
User manual
System Overview | en 7
2021-11 | 4 | F.01U.283.550