Duplex Configuration - Toshiba V Series User Manual

Chapter 1 Overview of Loop Controller L3
1.2.2

Duplex Configuration

1
4
Figure 1-4 shows an example of basic unit in duplex configuration (BU748) (implemented
on two single-configuration basic base units).
Figure 1-4 An Example of Basic Unit in Duplex Configuration (BU748)
(on Two Single-configuration Basic Base Units)
For the duplex-configuration basic unit on two single-configuration basic base units,
install a duplexing interface module in slot [S0].
Figure 1-5 shows another example of basic unit in duplex configuration (BU784).
Slot No.
[PS] Power supply module
[S0] Duplexing interface module (with direct I/O expansion cable)
[S1] CPU module (G3 I/O access)
[S2] CPU/IF module
[S3] CPU/IF module
[PS] Power supply module
[S0] Duplexing interface module (with direct I/O expansion cable)
[S1] CPU module (G3 I/O access)
[S2] CPU/IF module
[S3] CPU/IF module
Figure 1-5 An Example of Basic Unit in Duplex Configuration (BU784)
For this duplex configuration as well, install a duplexing interface module in slot [S0] of
each of the primary and secondary basic base units.
Module installed
model 3000 Loop Controller L3 User's Manual - Basic Hardware -