7)
Remove the screws (3 places) which secure the body and PWB set bracket.
(For the position of the PWB set bracket, see Fig. 3.1.)
8)
Remove the connectors (2 places) linked to the PS1 with the PWB set
bracket inclined slightly, then remove the PWB set bracket from the body.
9)
Remove each power supply units from the PWB set bracket and set new
power supply units.
PWB set bracket
PS1 (DC 5 V, DC 24 V)
Top side view
Fig. 3.6
PWB set bracket
PS1 (DC 5 V, DC 24 V)
Fig. 3.7
– 3–10 –
MAINTENANCE MANUAL
STE 73872