Advertisement
Configuring the System
Partitioning the System
Up to 7 operators can connect their keyboards to the
CSP-5000E System Controller simultaneously and
control its functions. You can use the security function
to limit what each operator can do. Normally, you
appoint a system administer to register operator IDs
and passwords, and manage their access to the CSP-
5000E System Controller.
Assigning passwords
Up to 128 users can be registered into the system. For
simplicity, you may designate a user as the system
administer who has access to the PASSWORD menu
to make changes for other users.
1
From the main menu, select "PASSWORD" and
then press the SET key.
PASSWORD
USER
ID
PASSWD
1
2
3
4
5
6
7
8
2
Select a user. If necessary, press the NEXT or
PREVIOUS key to see other pages.
3
Assign an ID and password to the selected user,
using the 10-key pad. Use the cursor keys to move
around. Then press the SET key.
4
When you are ready, press the SET key to proceed
to specifying the user's access to the system. See
the following sections for more details.
Notes
• All IDs must be 4-digit numbers.
• All passwords must be 4-digit numbers.
• You can use the ID "****" and the password "9999"
to access to the system controller and use all
functions.
42(EN)
Assigning PTZ priority
PTZ priority determines the keyboard that will prevail
when two or more keyboards issue a command to the
same pan/tilt unit at the same time.
Note
Only users who can access the PASSWORD menu can
make such changes.
1
From the "PASSWORD" menu, select a user and
then press the SET key.
PASSWORD-PARTITION
→
PTZ PRIORITY
MENU
CAMERA
MONITOR
TOUR
2
Select "PTZ PRIORITY" and then press the SET
key.
PASSWORD-PARTITION
8
PTZ PRIORITY
3
Enter a number, 1 being the highest and 8 the
lowest priority.
4
When you are ready, press the SET key to accept
the change.
If the same priority is assigned to the different
keyboards, the keyboard which issued a command
first is given a higher priority.
Limiting access to the system menus
You can turn off some system menus so that they will
not be accessible to some users.
Note
Only users who can access the PASSWORD menu can
make such changes.
1
From the "PASSWORD" menu, select a user and
then press the SET key.
PASSWORD-PARTITION
→
PTZ PRIORITY
MENU
CAMERA
MONITOR
TOUR
2
Select "MENU" and then press the SET key.
PASSWORD-PARTITION
→
INPUT CONFIGURE
ON
SYSTEM CONFIGURE
ON
SWITCHING PROGRAM ON
ALARM
ON
P/T
ON
PASSWORD
ON
3
Select a menu name, then use the cursor keys to
turn "ON" or "OFF" the menu. When off, the
menu will not be available to the user.
4
Repeat the same procedure with other menu
names. When you are ready, press the SET key to
accept the changes.
Limiting access to the cameras
If desired, you can limit a user's access to some
cameras.
Note
Only users who can access the PASSWORD menu can
make such changes.
1
From the "PASSWORD" menu, select a user and
then press the SET key.
PASSWORD-PARTITION
→
PTZ PRIORITY
MENU
CAMERA
MONITOR
TOUR
2
Select "CAMERA" and then press the SET key.
PASSWORD-PARTITION
CAMERA
→
1
ON
2
ON
3
ON
4
ON
5
ON
6
ON
7
ON
8
ON
3
Select a camera. If necessary, press the NEXT or
PREVIOUS key to see other pages.
4
Use the cursor keys to turn "ON" or "OFF" the
camera. When off, the camera will not be available
to the user.
5
Repeat the same procedure with other cameras.
When you are ready, press the SET key to accept
the changes.
43(EN)
Advertisement
Chapters
