Advertisement
Location and Function of Parts and Controls
Connectors
RESET
1
RESET switch
1 RESET switch
Not usable in the current version.
Do not press this switch.
2 PRINTER connector (mini jack)
Connect to a printer.
3 KBD I/F (keyboard interface) connector
(modular jack)
Connect to the CSP-5000E System Controller's KBD
I/F connector.
4 VIDEO OUT jack (BNC type)
Connect to a monitor.
8(EN)
AC IN
VIDEO OUT
VIDEO IN
PRINTER
KBD I/F
CABLE
COMP
LNS
7
AC IN socket
6
VIDEO IN jack
5
CABLE COMP switch
4
VIDEO OUT jack
3
KBD I/F connector
2
PRINTER connector
5 CABLE COMP (cable compensation) switch
Use this switch to set the compensation for signal loss
in cable connection to the CSP-5000E System
Controller, according to cable type and length as
indicated in the following table.
S
M
L
3C-2V
up to 100m
up to 200m
up to 300m
5C-2V
up to 160m
up to 330m
up to 500m
7C-2V
up to 200m
up to 400m
up to 600m
6 VIDEO IN jack (BNC type)
Connect to one of the VIDEO OUT connectors of the
CSP-5000E System Controller.
7 AC IN socket
Connect to an AC power source with the AC power
cord.
Connections
Video printer (not supplied)
to PRINTER
PRINTER
RESET
CSPK-5000E
to KBD I/F
System Keyboard
Interface cable (supplied)
to KBD I/F
CSP-5000E System Controller
* The system menu is displayed on the keyboard monitor.
Be sure to connect the keyboard monitor to make necessary settings
using the system menu.
Keyboard monitor (not supplied)*
to VIDEO IN
to VIDEO OUT
AC IN
VIDEO OUT
VIDEO IN
KBD I/F
CABLE
COMP
LNS
to VIDEO IN
to an AC outlet
to VIDEO OUT
9(EN)
Advertisement
Chapters
