Advertisement
Programming
Copying a Tour
Creating a tour may take time and a lot of work. If the
tours you are going to create are similar, you can
create a tour, then copy and modify it to create new
tours, as follows:
1
From the main menu, select SWITCHING
"PROGRAM" and then press the SET key.
SWITCHING PROGRAM
→
SEQUENCE
GROUP
EVENT
2
Select "SEQUENCE" and then press the SET key.
SEQUENCE
→
TOUR1-8
COPY
3
Select "COPY" and then press the SET key.
TOUR COPY
FROM
TO
→
24(EN)
4
Enter the tour number you want to copy from, as
well as the tour number you want to copy to.
Then press the SET key.
Once you copy the tour, you can go to select the new
tour from the SEQUENCE menu and modify it as
desired. For details, see "Programming sequences and
Tours" on page 22(EN).
Grouping Sequences
You can synchronize the dwell times of cameras to
prevent pictures from changing at different times on
different monitors. This makes it easy for operators to
follow the action captured by the cameras.
Grouping can only be done for sequences within a
tour. In a group, the sequence with the smallest
monitor number becomes the master sequence for
comparison. Grouping will take effect only when one
of the following conditions is met:
• Dwell times in the master sequence are all identical.
• The number of steps for all other monitors in the
group is equal to that of the master sequence.
• The number of steps for all other monitors in the
group is multiple of that of the master sequence.
Follow the steps below to group sequences within a
tour.
1
From the main menu, select "SWITCHING
PROGRAM" and then press the SET key.
SWITCHING PROGRAM
→
SEQUENCE
GROUP
EVENT
2
Select "GROUP" and then press the SET key.
GROUP
→
TOUR1
TOUR2
TOUR3
TOUR4
TOUR5
TOUR6
TOUR7
TOUR8
3
Select a tour (TOUR1 in this example), and then
press the SET key.
GOURP
TOUR1
SET GROUP NO.(1-8)
1-1
9-2
17-
25-
2-1
10-
18-
26-
3-
11-2
19-
27-
4-1
12-
20-
28-
5-1
13-
21-
29-
6-
14-2
22-
30-
7-
15-
23-
31-
8-
16-
24-
32-
Group number
Monitor numbers
4
Use the cursor keys to move around. Then enter a
same group number (from 1 to 8) to the right of the
monitor numbers you want to synchronize.
5
When you are ready, press the SET key to accept
the changes.
If you have grouped sequences for the currently
selected tour, the tour will start immediately.
25(EN)
Advertisement
Chapters
