Advertisement
Chapter 1
Introduction
Figure 1.1
P1 Panel with i-3 Control Technology
4
Overview
Siemens P1 Series Lighting Panel
with i-3 Control Technology is a
Siemens P1 Series Panel integrated
with i-3 Control Technology compo-
nents within the panel. This
i-3 Control Technology provides users
the means of controlling the branch
circuits remotely. In this
manual, each individual i-3 Control
Technology system component will
be discussed in detail with assembly
and removal instructions. Should
additional information be desired,
contact your Siemens Representative
or call Customer Service provided in
Appendix D - Customer Service
Support Info.
Scope
The purpose of this manual is to
assist the user in developing safe
and efficient procedures for the
installation, operation and
maintenance of the equipment.
The equipment described in this
manual consists of P1 Series
Lighting Panel with i-3 Control
Technology System. This equipment
may be used on systems up to
480Y/277 Volts max. A typical P1
Series Lighting Panel with i-3 Control
Technology System assembly is
shown in Figure 1.1.
The equipment manufactured has
been designed to operate in a system
having the short circuit interrupting
specified in the job specification. If
for any reason the equipment is later
used in a different system, user must
receive approval of intended changes
from Siemens.
Siemens Type P1 Lighting Panel
with i-3 Control Technology is
designed to function efficiently
under normal operation conditions.
It is designed and manufactured in
accordance with UL, NEMA and NEC
standard requirements. Performance
requirements of these standards have
been met or exceeded by these
designs.
The principal standards which apply
are:
½National Electric Code NFPA 70
½NEMA PB1, NEMA 250
½UL: 67, 50 and 916. Listed by
Underwriter's Laboratories, Inc.,
under File #E2269, #E4016 and
#E173174.
For more information, refer to the
latest edition of NEMA Standards
Publication PB1.1 "General
Instructions for Proper Installation,
Operation, and Maintenance of
Panelboards Rated 600 Volts or Less"
which is shipped with the panel and
also available on the NEMA web site
(www.nema.org). Should additional
information be desired, contact your
Siemens Representative or call
Customer Service provided in
Appendix D - Customer Service
Support Info.
Advertisement
