•
Press Increase value
text flashes.
SPD
TIME
XXX
XX:XX J
• Confirm by pressing Menu forwards
The following text flashes:
SPD
TIME
XXX
XX:XX J
• Press Increase value
press Decrease value
• Confirm by pressing Menu forwards
The figure 1 in the display changes to 2.
SPD
TIME
XXX
XX:XX J
The following text flashes again:
ADJ AGITATOR PROGRAM 1
NAME
SPD
TIME
XXX
XX:XX X
Repeat the procedure from the beginning to add
the different agitator values that are required. This
can be done three times in total.
The following text appears in the display:
ADJ AGITATOR PROGRAM 1
NAME
SPD
TIME
XXX
XX:XX X
In order to select this program: See Preset agitator
program.
EN | 02-2015
once and the following
R
PAUSE
XX:XX 1
.
R
PAUSE
XX:XX 1
to add a longer pause or
to shorten the pause.
.
R
PAUSE
XX:XX 1
R
PAUSE
XX:XX 2
R
PAUSE
XX:XX 1
DOC.N
: ST09184-02
O
OPERATING INSTRUCTIONS | SMART LINE | BOILING PAN
14.2.4 Name agitator program
•
Press Increase speed
program.
•
Press Increase value
eously for 3 seconds.
The following text appears in the display:
SELECT PROGRAM
NAME
•
Press Increase value
select the suitable letter or number.
• Press Menu forwards
the next character position or press Menu back
to move back to the previous character. (Max
17 characters).
•
Repeat until the program name is entered in the
display.
•
Press Increase value
eously for 3 seconds.
The new agitator program name appears in the
display:
ADJ AGITATOR PROGRAM 1
XXXXXXXXXX
SPD
TIME
XXX
XX:XX X
to select agitator
and STOP
simultan-
or Decrease value
to
to move forwards to
and STOP
simultan-
R
PAUSE
XX:XX 1
27