Troubleshooting - Sony Bravia Theatre Sync RHT-G800 Control Manual

Troubleshooting

If you experience any of the following
difficulties while using the HDMI CONTROL
function, use this troubleshooting guide to help
you remedy the problem.
The HDMI CONTROL function does not work.
• Check the HDMI connection (page 3).
• Make sure "HDMI CTRL" is set to "CTRL
ON" in AMP menu.
• Make sure the connected component is
compatible with the HDMI CONTROL
function.
• Check the HDMI CONTROL settings on the
connected component. See the operating
instructions supplied of the connected
component.
• If you change the HDMI connection,
connect/disconnect the AC power cord, or
there is a power failure, repeat the
procedures of "Preparing for the HDMI
CONTROL functions" (page 4).
• The stand may not work correctly if you
select a component that is not compatible
with the HDMI CONTROL function on the
TV side.
No sound is output from the stand and TV
speaker.
• Check the volume of the stand and the TV.
• Select the input of the stand correctly.
The sound is output from both the stand and
the TV.
• Mute the sound of the stand or the TV.
The System Power Off function does not work.
• Change the setting of the TV to turn
connected components off automatically
when you turn off the TV. For details, refer
to the operating instructions of the TV.
An image does not appear on the TV.
• Check whether HDMI IN and HDMI OUT
are connected in reverse.
The TV program does not appear on the TV.
• Press TV (white) or TV (orange), then select
the program you want to watch using the
number buttons or PROG+/–.
7
GB