Other Functions; Controlling The Computer Using The Supplied Remote Commander (When Using The Usb Cable); Controlling The Computer; Using The Supplied Presentation - Sony VPL-CX70 Operating Instructions Manual

Other Functions

Controlling the Computer

Using the Supplied Remote
Commander (When Using the
USB Cable)
When you connect a computer to the
projector using the USB cable, you can
control the mouse of the computer using the
Remote Commander.
The R/L CLICK keys and joystick function
as follows.
Key and joystick
R CLICK (front)
L CLICK (rear)
Joystick
For details, see "To connect a computer" on
page 13.
Note
Make sure that nothing obstructs the infrared
beam between the Remote Commander and the
remote control detector on the projector.
Controlling the Computer
Using the Supplied
Presentation Tool (When
Using the Air Shot) (VPL-CX76
only)
When you are using the Air Shot to project
the picture from a computer, you can
perform some operations for a slide show
using the supplied presentation tool. The
following keys on the presentation tool are
usable.
Key
LASER
G SLIDE g
22
Other Functions
Function
Right button
Left button
Corresponds to the
movements of the
mouse
Function
*
Emits a laser beam.
Changes the slides in
the forward/backward
direction.
Key Function
B Displays/cancels a
black screen during the
slide show.
* Also available when you are not using the
Air Shot.
Notes
• If there is any obstruction between the
presentation tool and the remote control
detector on the projector, the presentation
tool may not function properly.
• A black screen may not be displayed even if
you press the "B" key depending on the
operating system (OS) of the language of
your computer.
Off & Go Function
If you are leaving the conference room
immediately, turn the projector off, and then,
after the lens protector closes and the
powered tilt adjuster is retracted into the
projector, you can unplug the AC power
cord. After the AC power cord is unplugged,
the fan runs for a certain time automatically.
Notes
• When unplugging the AC power cord, ensure
that the lens protector has closed and the
powered tilt adjuster has been retracted into
the projector. Moving the projector with the
powered tilt adjuster extended may damage
the adjuster.
• Turn off the projector according to the
procedure explained in "Turning Off the
Power," then cool it down before storing the
projector in the carrying case.
• However, if the unit has been on for less than
15 minutes, the fan might not begin to turn as
a result of inadequate charging. In that case,
follow the procedure for turning off the
power as described in "Turning Off the
Power" on page 18.