Advertisement
Setpoints
Factory setting
7-day time switch
Enter holidays or
absences
6 / 18
Siemens
Building Technologies
You can freely adjust the setpoints for the weekly and 24-hour operating modes.
Setting range for all setpoints without setpoint limitation 3...35 °C.
Setting range for all setpoints with setpoint limitation 16...35 °C.
Factory setting for heating
,
,
,
,
Factory settings: Switching times
Comfort phases
P1
1.
07:00
2.
06:00
3.
06:00
Three different switching patterns are available to simplify entry of switching times. These
can be assigned as blocks to the corresponding weekdays 1...5 and weekend days
6...7. As a result, you need to adapt the switching times and room temperatures only
once for each block.
Switching pattern
You can also enter individual days
You can enter the beginning, temperature and end of your holidays. At the beginning of
the holidays, the controller switches to the desired holiday temperature and returns to the
previously set operating mode at the end of the holidays.
In holiday mode, symbol
Proceed as follows to enter your settings:
Set slider to position 15 (start of absence): Press
for your holidays.
Set slider to position 16 (temperature during absence): Press
the desired temperature while on holidays.
Set slider to position 17 (end of absence): Press
for your holidays.
Return the slider to position RUN. Symbol
RUN
symbol.
Press
,
,
Room temperature controller radio set REV24RF../SET
20 °C
16 °C
8 °C
12 °C
P2
P3
23:00
PASS
08:00
17:00
08:00
11:00
...
is displayed along with the end of holiday mode.
,
or move the slider to end holiday mode prematurely.
Factory setting for cooling
24 °C
28 °C
35 °C
30 °C
P4
P5
PASS
PASS
22:00
PASS
13:00
17:00
Blocks
.
or
to set the start date
or
or
to set the end date
is displayed to the left of the
CE1N2206en
P6
PASS
PASS
22:00
to set
2018-11-07
Advertisement
