NEC N8100-2089F User Manual page 90

Chapter 2 Preparations
4. Install a PCI board to the PCI slot.
When installing the board, position the terminal part of the PCI board to the PCI slot and insert it.
5. Bring back the lever to its original position, and fix the PCI board.
6. Continue to install or remove internal optional devices, mount and connect the server, and turn it on.
90
Important
Do not touch the connector of PCI slot or the terminal part of PCI boards
and the signal pins of electric parts installed on the board. Installing boards
with dirt or oil can cause malfunction.
 Make sure that the head of a PCI board bracket is seated into the fixed slot.
Note
 Depending on type of PCI boards, the terminal part of the PCI board may be too
large to fit in the connector.
 If you have trouble installing the board, remove the board once and try again. If
you apply excessive pressure on the board, a PCI board or PCI connector might
break.
Tips
If the locking mechanism of PCI slot is tight, fix the PCI board slowly until it is
surely locked.
Express5800/T120e User's Guide
1. Installing Internal Optional Devices