Table of Contents
Advertisement
Chapter 2 Preparations
8.
Depending on the components to be installed or removed, follow the procedure in order.
Refer to Chapter 2 (1.7 Internal Flash Memory to 1.14 Optical Disk Drive).
9.
Install CPU duct.
Refer to Chapter 2 (1.20 Installing CPU Duct).
10. Attach side cover.
Refer to Chapter 2 (1.21Installing Side Cover).
11. Locate the server at installation site.
Refer to Chapter 2 (2.1 Installation).
12. Install hot-plug hard disk drives.
Refer to Chapter 2 (1.22 Hot-plug Hard Disk Drive).
13. Attach Front Bezel.
Refer to Chapter 2 (1.4 Removing Front Bezel).
14. If installing or removing power supply unit or HDD cage, be sure to apply SDR data to system by using
SDR media provided with the server.
Refer to Chapter 2 (1.25 Applying SDR Data).
This is the end of the installation or removal procedures for internal optional devices.
Continue the setup with reference to Chapter 2 (2.2 Connection).
Important
An error may occur before SDR data is applied to the system.
Express5800/T120e User's Guide
1. Installing Internal Optional Devices
51
Advertisement
Table of Contents
