For the registration, you will need:
1. Your WiFi network password
2. Your cooker hood password
The password for your cooker hood
consists of the last 9 digits of the serial
number. This can be found on the
appliance's data plate.
The data plate can be found on the
front of the housing.
Follow the instructions to start
registering the appliance in the app.
If requested to activate WiFi on the
cooker hood, proceed as follows:
Before using for the first time
With the deflector plate retracted,
touch the On/Off switch .
All symbols light up with reduced
brightness.
Press and hold the run-on option
control until the grease filter
and charcoal filter symbols light
up.
Touch 2.
The deflector plate extends.
2 will light up constantly, 3 will flash.
The cooker hood will be ready for
connection in the next 2 minutes.
Follow the instructions in the app.
When successfully connected, 2 and
3 will light up constantly.
Quit connection mode on the cooker
hood by touching the run-on option
control .
The cooker hood can now be operated
via the app.
19