Miele DA 3366 Operating And Installation Instructions

Miele DA 3366 Operating And Installation Instructions

Advertisement

User
Manual
Thanks for choosing ImportAppliances for your kitchen appliance purchase.
We hope you are enjoying the convenience, quality and affordability of your
new appliance.
If you have any issues or questions, please contact us via email:
info@ImportAppliances.com
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Advertisement

Table of Contents
loading

Summary of Contents for Miele DA 3366

  • Page 1 User Manual Thanks for choosing ImportAppliances for your kitchen appliance purchase. We hope you are enjoying the convenience, quality and affordability of your new appliance. If you have any issues or questions, please contact us via email: info@ImportAppliances.com THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
  • Page 2 Operating and installation instructions Cooker hood To prevent the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 10 553 770 THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
  • Page 3: Table Of Contents

    Contents Warning and Safety instructions................ 4 Caring for the environment ................ 13 Guide to the appliance .................. 14 Modes of operation .....................  16 Operation...................... 17 Switching the fan on....................17 Fan run-on after cooking ..................17 Switching the fan off ..................... 17 Switching the hob lighting on/off ................
  • Page 4 Contents Technical data......................  43 Note for test institutes ................... 43 THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
  • Page 5: Warning And Safety Instructions

    They contain important notes on the safety, installation, use and maintenance of the appliance. Miele cannot be held liable for non- compliance with these instructions. Keep these instructions in a safe place and ensure that all users are familiar with the contents.
  • Page 6 Warning and Safety instructions  The cooker hood can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised whilst using it, or have been shown how to use it in a safe way and recognise and understand the consequences of incorrect operation.
  • Page 7: Technical Safety

     Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised technician.  A damaged appliance can be dangerous. Check it for visible signs of damage. Do not use a damaged appliance.
  • Page 8 Miele spare parts.  If the electrical connection cable is faulty it must only be replaced by a Miele authorised service technician to protect the user from danger.  During installation, maintenance and repair work, the appliance must be disconnected from the mains electricity supply.
  • Page 9 Warning and Safety instructions Using at the same time as another heating appliance that depends on the air from the room  Danger of toxic fumes! Great care should be taken when using the cooker hood in the same room or the same area of the house at the same time as another heating appliance that depends on the air from the room.
  • Page 10 Warning and Safety instructions In order to ensure safe operation and to prevent gases given off by the heating appliance from being drawn back into the room, when the cooker hood and the heater are both operated simultaneously, an underpressure in the room of 0.04 mbar (4 Pa) is the maximum permissible.
  • Page 11: Correct Use

    Warning and Safety instructions Correct use  Never use a naked flame beneath the cooker hood. To avoid the danger of fire, do not flambé or grill over a naked flame. When switched on, the cooker hood could draw flames into the filter. Fat deposits could ignite, presenting a fire hazard.
  • Page 12: Correct Installation

    Wear gloves to protect your hands from being cut.  Exhaust ducting must be of non-inflammable material. Suitable material is available from Miele specialist dealers or the Miele Spares Dept.  The appliance must not be connected to a chimney or flue which is in use.
  • Page 13 The steam could reach electrical components and cause a short circuit. Accessories  Only use genuine original Miele accessories and spare parts with this appliance. Using accessories or spare parts from other manufacturers will invalidate the warranty and Miele cannot accept liability.
  • Page 14: Caring For The Environment

    / recycling centre for electrical and electronic appliances, or contact your dealer or Miele for advice. You are also responsible (by law, depending on country) for deleting any personal data that may be stored on the appliance being disposed of.
  • Page 15: Guide To The Appliance

    Guide to the appliance THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
  • Page 16 Guide to the appliance a Exhaust socket for air extraction/recirculation b Controls c Grease filter d Pull-out deflector plate e Hob lighting f Charcoal filter Accessory required for recirculation mode g Sliding switch for the hob lighting h Sliding switch for the fan i Drop-down front panel A front panel to match your kitchen furniture may be fitted instead of this panel (DML 400 installation kit required).
  • Page 17: Modes Of Operation

    Modes of operation Depending on the model of the cooker Recirculation mode hood, the following options are (requires purchase of conversion kit and available: charcoal filter: see "Technical Data") Extraction mode The air is drawn in and cleaned first by the grease filter and then by a charcoal The air is drawn in and cleaned by the filter.
  • Page 18: Operation

    Operation Switching the fan on Switching the hob lighting on/ For light to heavy cooking vapours, select from power levels 1 to 3. For The hob lighting can be switched on short periods of strong vapours and and off with the deflector pushed in or cooking odours, e.g.
  • Page 19: Energy Saving Tips

    Energy saving tips This cooker hood operates very efficiently and economically. The following will help you to save even more energy when using it: – Ensure that there is sufficient ventilation in the kitchen when cooking. In extraction mode, if there is insufficient air flow the cooker hood cannot operate efficiently and this causes increased operating noise...
  • Page 20: Cleaning And Care

    General information  To help prevent re-soiling, a The surfaces and controls are proprietary conditioning agent for susceptible to scratches and stainless steel (available from Miele) abrasion. can also be used. Please observe the following Apply sparingly with a soft cloth.
  • Page 21: Grease Filter

    Cleaning and care Grease filter The re-usable metal grease filter in the appliance removes solid particles from the kitchen vapours (grease, dust, etc) preventing soiling of the cooker hood.  An oversaturated filter is a fire hazard. When removing the grease filter do not tilt it downwards at an angle.
  • Page 22 Cleaning and care  When removing the filter for cleaning, Unsuitable cleaning agents also clean off any residues of oil or fat Unsuitable cleaning agents can cause from the now accessible casing to damage to the surface of the filters if prevent the risk of these catching fire.
  • Page 23: Charcoal Filter

     Used charcoal filters can be disposed Charcoal filters are available to order via of with the normal household waste. the Miele Webshop, the Miele Spare Parts Department (see end of this booklet for contact details) or from your Miele dealer.
  • Page 24: Changing A Lamp

    Manufacturer ....... EGLO Lamp type ........GU10 Specification........ 11427 Wattage ........... 3 W These lamps are available from Miele or from specialist retailers.  Pull out the deflector plate, and remove the grease filter as described earlier.  Switch off the fan and the lighting.
  • Page 25: After Sales / Warranty

    Miele dealer or the Miele Service Department. Contact details for Miele are given at the end of this booklet. N.B. A call-out fee will be charged for service visits where the problem could have been resolved as described in these instructions.
  • Page 26: Installation

    Installation Before installation  Before installation, it is important to read the information given on the following pages as well as the "Warning and Safety instructions" at the beginning of this booklet. THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
  • Page 27: Assembly Parts

    Installation Assembly parts THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
  • Page 28 Installation a 1 exhaust connection for exhaust ducting  150 mm. b 1 reducing collar 14 screws 4 x 15 mm for securing the cooker hood into the for exhaust ducting  125 mm. wall unit. c 1 non-return flap for fitting into the exhaust connection on the motor unit (not needed for recirculation mode).
  • Page 29: Appliance Dimensions

    Installation Appliance dimensions a The front section of the wall housing unit must be fitted with a shelf to the depth of the partition wall. If the appliance is fitted further back, e.g. to accommodate a front panel, then the shelf depth should be correspondingly deeper.
  • Page 30: Safety Distance Between Hob And Cooker Hood (S)

    Installation Safety distance between hob and cooker hood (S) When planning the installation height of your cooker hood, the minimum safety distance between the top of a cooker or hob and the bottom of the cooker hood is as follows, unless a greater distance is specified by the manufacturer of your cooking appliance.
  • Page 31: Installation Recommendations

    Installation Installation recommendations – To achieve optimum vapour extraction, the cooker hood must be positioned centrally over the hob, not to the side. – The hob should be no wider than the cooker hood, and if possible, it should be narrower. –...
  • Page 32 Installation a Example: Installation without a front panel fitted and with the front edge of the deflector plate flush with the front edge of the furniture housing unit. This installation needs a shelf of at least 95 mm deep. b Example: Installation with a front panel to match the kitchen furniture.
  • Page 33 Installation  Secure the spacer strip underneath the housing unit sides, flush with the wall.  The brackets are designed for 16 and 19 mm thick unit sides. Orientate the bracket so that the vertical depth matches the thickness of the unit side.
  • Page 34 Installation To avoid scratching the deflector plate, do not remove the protective film between the deflector plate and the casing until the hood has been placed in the housing unit.  Installation of the cooker hood is carried out without the grease filter ...
  • Page 35 Installation  Secure the cooker hood to the  Secure the spacer strip to the back of brackets from below using two the appliance from behind using 4 screws on each side. plastic rivets as shown.  Pull out the deflector plate and remove the protective film between the deflector plate and the casing.
  • Page 36: Attaching The Front Panel

    Installation Attaching the front panel Aligning the deflector plate The front of the deflector plate can be The position of the deflector plate can fitted with a front panel to match be brought forward by up to 35 mm existing kitchen furniture units. using the adjusting screws on either The front panel must not exceed side of the deflector plate.
  • Page 37: Fitting The Grease Filter

    Installation Fitting the grease filter Extraction mode  Remove the protective foil around the edge of the grease filter.  Insert the non-return flap, if required. Make sure that it opens easily and closes again by itself.  When fitting the grease filter, make sure that the red plastic guides are at dai2699 the front and facing upwards.
  • Page 38: Recirculation Mode

    Conversion kit DUU 151, available through your dealer or from Miele, is required for operating the cooker hood in recirculation mode. You will also need a charcoal filter (see  Attach the exhaust ducting to the "Technical data").
  • Page 39: Electrical Connection

    Installation wall or the ceiling. A non-return flap is not used in recirculation mode.  Fit the charcoal filter (see "Cleaning and care"). Electrical connection Refer to the notes in “Electrical connection” and “Warning and Safety instructions” before connecting to the electricity supply. ...
  • Page 40 Electrical connection If the switch is not accessible after All electrical work should be installation (depending on country), an undertaken by a suitably qualified additional means of disconnection must and competent person in strict be provided for all poles. accordance with current national and For extra safety it is advisable to protect local safety regulations (BS 7671 in the appliance with a suitable residual...
  • Page 41: Connection For Air Extraction

    Connection for air extraction  If the exhaust is ducted through an  If the cooker hood is used at the outside wall, a telescopic wall vent or same time as a heating appliance a roof vent (available as an optional that relies on oxygen from the same accessory) is recommended.
  • Page 42: Condensate Trap

    Connection for air extraction Condensate trap Silencer To achieve even further reductions in noise levels, a special silencer (optional accessory) can be fitted in the ducting system. In addition to insulating the exhaust ducting, we recommend that a suitable Extraction mode condensate trap is also installed to collect and evaporate any condensate which may occur.
  • Page 43 Connection for air extraction Recirculation mode The silencer needs to be positioned between the exhaust socket and the exhaust grille . Ensure there is adequate space for fitting it. THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
  • Page 44: Technical Data

    All information required regarding measuring noise levels is given in the "Testing for sound emissions" leaflet. The latest version of this leaflet can be ordered by email from: – testinfo@miele.de Please quote your postal address, as well as the model and serial number of your cooker hood (see data plate).
  • Page 45 Data sheet for household cooker hoods In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No. 66/2014 MIELE Model name / identifier DA 3366 Annual Energy Consumption (AEC 61,4 kWh/year hood Energy efficiency class Energy efficiency index (EEI...
  • Page 46 THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
  • Page 47 THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
  • Page 48 Fax: 011-46 900 001 Fax: +65 6735 1161 800-MIELE (64353) E-mail: customercare@miele.in E-Mail: info@miele.com.sg E-Mail: info@miele.ae Internet: www.miele.in Internet: www.miele.sg Website: www.miele.ae Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
  • Page 49 DA 3366  en-GB M.-Nr. 10 553 770 / 01 THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Table of Contents