Separating Control Panel From Controller; Removing Control Panel; Cable Between Controller And Control Panel - Toshiba TH850A Instruction Manual

Industrial robot
Hide thumbs Also See for TH850A:
Table of Contents

Advertisement

4.3

Separating Control Panel from Controller

4.3.1

Removing Control Panel

Remove the control panel in the following manner.
a)
Loosen the four (4) screws at the four (4) corners, which secure the control panel.
b)
Remove these screws, then carefully draw out the control panel toward your side.
Caution: Be careful of the cable connected on the rear side.
4.3.2

Cable between Controller and Control Panel

The cable required to connect the control panel and controller when they are installed
separately can be provided optionally.
TRANSPORTATION AND INSTALLATION MANUAL
Fig. 4.5 Removing control panel
– 50 –
STE80753

Advertisement

Table of Contents
loading

This manual is also suitable for:

Th1050aTh1200a

Table of Contents