Chapter 2 Preparations
1.16
RAID controller extension battery N8103-198
When mounting a RAID controller (N8103-190/201), by installing an extension battery, data loss due to accident
such as power shortage can be avoided. if Write Back being enabled,
1.16.1
Handling precautions
When using an extension battery, please pay attention to the following. If you ignore the following warnings,
there may be loss of data and hardware.
The extension battery is an extremely sensitive device. Prior to installation, avoid static electricity by
touching the metal frame of the unit or similar.
Do not drop or otherwise damage the extension battery.
For recycling and disposal of extension batteries, refer to the user's guide attached to the RAID controller or
flash backup unit.
1.16.2
Installing the RAID controller extension battery
Check the parts of the kit before installing extensions.
Parts included in the option kit
●
To install the components, follow these steps.
1.
See steps 1 to 7 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
nd
2.
When 2
Riser Card is installed, See Chapter 2 (1.10 Riser Card) to remove the 2
When 2.5-inch HDD Cage (Rear) is installed, remove it.
3.
Install the battery to battery holder.
Cable should through underneath of battery holder or the air baffle can not be installed properly.
Express5800/R120h-2E User's Guide
1. Installing Internal Optional Devices
nd
Riser Card.
115