Chapter 2 Preparations
1.23
Serial cable
A serial connector can be attached to this device.
1.23.1
Installation
Please prepare the following before installing the options.
Parts included in the option kit
T-10 hexalobular driver
To install the components, follow these steps
1.
See steps 1 to 7 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations
2.
Remove the blank cover of serial cable.
3.
Install the serial cable then fix by 2 screws.
4.
See Chapter 2 (1.5 Top Cover) to attach the top cover of the server.
Note
In order to prevent the damage for the electric parts, start the installation of system after
providing power anti-static treatment. If a proper earth is not provided, electrostatic
discharge may occur.
Express5800/R120h-2E User's Guide
1. Installing Internal Optional Devices
135