Setting Up Your Tv ("Initial Setup") - Sony KV-BT21 Operating Instructions Manual

x Setting up your TV
("Initial Setup")
When you turn on your TV for the first time, the "Initial Setup" menu will appear.
You may change the menu language and preset the TV channels automatically using
the buttons on the top control panel.
Tip
and V/v/B/b buttons on the remote control can also be used for the
• The MENU,
operations below.
1
Press VOLUME +/– to select the desired
menu language, then press TV/VIDEO.
The selected menu language appears.
2
Press VOLUME +/– to select "Yes", then
press TV/VIDEO to preset the channels
automatically or select "No" to skip
automatic channel presetting.
Once you select "Yes", your TV will start
searching for all the available channels.
If the message "No channel found. Please
connect cable/antenna." appears, check your
TV connections, then press TV/VIDEO.
3
Press VOLUME +/– to select "No", then
press TV/VIDEO. This menu will not appear
again the next time you turn on the TV by
pressing !.
To allow this menu to appear again, select
"Yes", then press TV/VIDEO.
Tips
• You can immediately go to the end of the "Initial Setup" menu by pressing MENU.
• You can also set up your TV by pressing the MENU button on the top control panel for about
five seconds or using the menu system (see page 11).
Initial Setup
Language: English
Initial Setup
First please connect
cable/ antenna
Start Auto Program now?
Yes
No
Initial Setup
Display this menu next time?
Yes
No
Installation
7