How To Change The Value Of Bit Pointer Parameter To Point To The Value Of A Bit In Another Signal - ABB ACSM1 Control Panel User Manual

How to change the value of bit pointer parameter to point to the value of a bit
in another signal
The bit pointer parameter points to the value of a bit in another signal, or can be fixed
to 0 (FALSE) or 1 (TRUE). For the latter option, see page 29. The bit pointer
parameter points to a bit value (0 or 1) of one bit in a 32-bit signal. The first bit from
the left is bit number 31, and the first bit from the right is bit number 0. E.g. bit 01
stands for bit number 2
bit number 2
When adjusting a bit pointer parameter on the control panel, POINTER is selected to
define a source from another signal. A pointer value is given in format P.xx.yy.zz,
where xx = Parameter group; yy = Parameter index, zz = Bit number.
For more information, see appropriate Firmware Manual.
Step Action
1. Go to the Main menu by pressing
EXIT
by pressing
2. Go to the Parameters option by selecting PARAMETERS on the menu with
keys and
3. Select the appropriate parameter group with keys
bit pointer parameter 12.04 DI01 OUT PTR is used as an example.
4.
SEL
Press to select the appropriate parameter group. Select the appropriate
parameter with keys
shown below its name.
EDIT
5. Press .
NEXT
6. Press . Current value of the bit pointer parameter is shown, as well as the
parameter group it points to.
1
= 2, the second bit from the right, and number 00 stands for
0
= 1, the first bit from the right.
MENU
if you are in the Output mode, otherwise
repeatedly until you get to the Main menu.
ENTER
, and pressing .
and . Current value of each parameter is
LOC
PARAMETERS
FAULT LOGGER
TIME & DATE
LOC
01 ACTUAL VALUES
02 I/O VALUES
03 CONTROL VALUES
04 POS CTRL VALUES
06 DRIVE STATUS
and . Here the
LOC
12 DIGITAL IO
13 ANALOGUE INPUTS
15 ANALOGUE OUTPUTS
16 SYSTEM
17 PANEL DISPLAY
LOC
1201 DI01
1202 DI02 CONF
1203 DI03 CONF
1204 DI01 OUT PTR
LOC
1204 DI01 OUT PTR
CANCEL
LOC
1204 DI01 OUT PTR
01 ACTUAL VALUES
CANCEL
27
Display
MAIN MENU
EXIT 00:00 ENTER
PAR GROUPS 01
EXIT 00:00 SEL
PAR GROUPS 12
EXIT 00:00 SEL
PARAMETERS
CONF9901
P.01.01.00
EXIT 00:00 EDIT
PAR EDIT
Pointer
00:00 NEXT
PAR EDIT
P.01.01.00
00:00 NEXT
Operation
1