Parameters; How To Select A Parameter And Change Its Value - ABB ACSM1 Control Panel User Manual

24

Parameters

In the Parameters option, you can:
• view and change parameter values
• start, stop, change the direction and switch between local and remote control.

How to select a parameter and change its value

Step Action
1. Go to the Main menu by pressing
EXIT
by pressing
2. Go to the Parameters option by selecting PARAMETERS on the menu with
keys and
3. Select the appropriate parameter group with keys
SEL
Press .
4. Select the appropriate parameter with keys
value of the parameter is shown below the selected parameter.
EDIT
Press .
5. Specify a new value for the parameter with keys
Pressing the key once increments or decrements the value. Holding the key
down changes the value faster. Pressing the keys simultaneously replaces the
displayed value with the default value.
Operation
MENU
if you are in the Output mode, otherwise
repeatedly until you get to the Main menu.
ENTER
, and pressing .
and .
and . The current
and .
Display
LOC
MAIN MENU
PARAMETERS
FAULT LOGGER
TIME & DATE
EXIT 00:00 ENTER
LOC PAR GROUPS
01 ACTUAL VALUES
02 I/O VALUES
03 CONTROL VALUES
04 POS CTRL VALUES
06 DRIVE STATUS
EXIT 00:00 SEL
LOC PAR GROUPS
99 START-UP DATA
01 ACTUAL VALUES
02 I/O VALUES
03 CONTROL VALUES
04 POS CTRL VALUES
EXIT 00:00 SEL
LOC PARAMETERS
9901 LANGUAGE
ENGLISH
9904 MOTOR TYPE
9906 MOT NOM CURRENT
9907 MOT NOM VOLTAGE
EXIT 00:00 EDIT
LOC PARAMETERS
9901 LANGUAGE
9904 MOTOR TYPE
AM
9906 MOT NOM CURRENT
9907 MOT NOM VOLTAGE
EXIT 00:00 EDIT
LOC PAR EDIT
9904 MOTOR TYPE
AM
[0]
CANCEL SAVE
00:00
LOC PAR EDIT
9904 MOTOR TYPE
PMSM
[1]
CANCEL 00:00 SAVE
1
01
99