Powering On/Off; Connecting The Power Cord; Power Indicator - Panasonic PT-FW430E Operating Instructions Manual

Powering ON/OFF

Connecting the power cord

Be sure to Insert the attached power cord securely to its base to prevent it from coming off.
Before connecting the power cord, confirm that the MAIN POWER switch is in the "
Installation
J
Insert the plug securely until its right
and left claw click.

Power indicator

The power indicator informs you the status of the power. Confirm the status of the <Power indicator> before
operating the projector.
Indicator status
No illumination or flashing
RED
Flashing
Flashing
GREEN
ORANGE
Flashing
Note
When the projector is getting ready to be switched off (<POWER INDICATOR> is lit in orange), the internal cooling fan is
z
operating to cool the projector.
It may take a while to start the projection if the
z
switched off.
Electricity is consumed even when the power is off (<POWER INDICATOR> is lit in red).
z
26
- ENGLISH
Power indicator
The MAIN POWER is switched off.
The power is switched off (When [STANBY MODE] is set to [ECO]).
Press the POWER (
Lit
When the LAMP or TEMP indicator is flashing, you cannot operate. (
The power is switched off (When [STANDBY MODE] is set to [NORMAL]).
Press the POWER (
When the LAMP or TEMP indicator is flashing, you cannot operate.
The power is switched on and the projector is getting ready to project.
Projection will start momentarily.
Lit Projecting.
The projector is getting ready to be switched off.
Lit
The power will be switched off (standby mode) momentarily.
The POWER (
switched off.
Projection will start momentarily.
POWER (
Removal
J
Remove the power cord from the
electrical outlet while pressing the
knobs on its sides.
Status
) button to start the projection.
) button to start the projection.
) button is pressed while the projector is getting ready to be
)
button is pressed while the projector is getting ready to be
" (OFF) position.
page 66)
Æ