Control Panel; Rear Terminals - Panasonic PT-FW430E Operating Instructions Manual

CONTROL PANEL

(1) (2) (3)

Rear terminals

(1)
(7)
(1) LAN
Connects to a LAN cable for network connection.
(2) HDMI IN
Connects to HDMI input signals.
(3) DVI-I IN
Connects to DVI-D, DVI-A (RGB or YP
signals.
(4) COMPUTER IN
Connects to RGB or YP
(5) S-VIDEO IN
Connects to S-VIDEO input signals.
(6) VIDEO IN
Connects to VIDEO input signals.
(7) SERIAL IN
Connects to a computer via an RS-232C cable.
(4)
(2) (3)
(8)
P ) input
B R
P input signals.
B R
About Your Projector
(1) Power < > button
Turns power on/off when the main power switch
on the rear of the projector is [ON].
(2) <INPUT SELECT> button
Selects the input signal. (
(3) <MENU> button
Displays the MENU screen. (
(4) ▲▼◄► buttons, <RETURN> button, <ENTER>
button
Navigate the MENU screen.
(4) (5) (6)
(9)
(8) Security slot
Attach the commercial shackle lock, manufactured
by Kensington, to protect your projector.
Compatible with the Kensington MicroSaver
Security System.
(9) AUDIO IN 1-3
Connects to the audio input signals.
AUDIO IN 3 has right and left (L and R) terminals.
(10) VARIABLE AUDIO OUT
Outputs the audio signals input to the projector.
(11) Remote control signal receiver(rear)
Attention
When a LAN cable is directly connected to the projector,
z
the network connection must be made indoors.
page 30)
Æ
page 33)
Æ
(10) (11)
ENGLISH -
17