Programming The Amax Sytem Via Pc And Usb; Installing The Programming Software; Connecting The Pc And The Amax Panel; Starting The Programming Software - Bosch AMAX panel 2100 Quick Start Manual

14 en | Programming and Operating the AMAX System
5.5

Programming the AMAX Sytem via PC and USB

By using the A-Link Plus remote programming software on a PC, the AMAX panel configuration
can be remotely programmed or controlled. For direct communication, the PC and the AMAX
panel have to be connected with the USB cable (male A / male A).
5.5.1

Installing the Programming Software

Double-click on the A_Link_setup.exe file to install the programming software on the PC.
4
An installation wizard guides you through the installation.
P
5.5.2

Connecting the PC and the AMAX Panel

1. Connect the USB cable to the USB port on the AMAX panel and to one of the USB ports
on the PC.
2. Follow the operating system instructions to install the USB driver.
You will find the device driver in the A-Link Plus program path for installation
(example: C:\Programme\Bosch Security System\A-Link Plus\USB_DRIVER).
3. Open the Device Manager in the operating system control and check if the USB driver
has been installed and which COM port has been assigned to it.
4. If the USB driver has not been installed automatically, install it manually.
The installation creates an additional COM device on the PC.
P
5.5.3

Starting the Programming Software

1. Select Start – All Programs – Bosch Security Systems – A-Link Plus – A-Link Plus
vn.n.n.
n.n.n = current program version
Or
Double-click the A-Link Plus vn.n.n shortcut on your computer desktop.
2. When the Login dialog opens, enter the Operator name and Password.
The default entries are ADMIN for both the Operator and Password fields.
3. Click OK to log in to A-Link Plus.
2015.05 | 05 | F.01U.309.297
All manuals and user guides at all-guides.com
Quick Start Manual
AMAX panel
Bosch Sicherheitssysteme GmbH