Bosch AMAX panel 2100 Quick Start Manual page 23

AMAX panel
Menu Items
TEST REPORT DURAT.
TEST RPT INTERV: h
TEST REPORT: hour
TEST REPORT: min
DUAL IP
REMOTE ACCESS
RPC IP/ PORT/ POLL
RPC IP ADDRESS
RPC PORT 5 DIGIT!
RPC POLL: 1-15h
CALLBACK/ DOMESTIC
RING TIMES
Figure 5.9: Communications and Reporting Manager (continued)
Bosch Sicherheitssysteme GmbH
All manuals and user guides at all-guides.com
Parameters / Description
00 = Do not use timing report
00 - 23 hours Others = Do not use real-time report
00 - 59 minutes Others = Do not use real-time report
REM. ACCESS ARMED 0-disable 1-enable
REMOTE PSTN ACCESS 0-disable 1-enable
REMOTE IP ACCESS 0-disable 1-enable
RPC ACCESS CODE
CALLBACK SETTING 0-disable 1-enable
CALLBACK/DOMEST No
DOMESTIC CALL
DOMESTIC No (1-4)
CHANGE DOM PHO. No
CALLBACK PHONE No
0
1 - 13 = Number of rings until the control panel responds
14
more than twice and hang up. Wait a minimum of 8 sec and
call the control panel again. The control panel answers on
the first ring.
15
more than four times and then hang up. If you call again
within 45 sec, the control panel answers the call on the first
ring.
Quick Start Manual
Programming and Operating the AMAX System | en
01 - 99 = 1 - 99 hours
0-1 ip module
1-2 ip modules
= Panel does not answer
= Call the control panel and allow the phone to ring no
= Call the control panel and allow the phone to ring no
23
Certification Default
EN=1-24 24
99
99
1
1
1
1
15
0
14
2015.05 | 05 | F.01U.309.297