Huawei Airbridge cBTS3612 Installation Manual page 33

Installation Manual
Airbridge cBTS3612 CDMA Base Station
The process of laying down and erecting a cabinet is shown as Figure 7.
Figure 7 The process of laying down and erecting a cabinet
10.3 Sharp Edges
When conveying equipment by hand, please wear protective gloves to prevent cuts and injuries
caused by sharp edges.
10.4 Inserting & Drawing Out the Boards
Do not apply too much force when inserting the boards to avoid bending of the pins on the
backplane.
Insert the board along the slot to avoid short-circuit resulting from their surfaces contacting each
other.
Keep hands off the board circuit, elements, connectors or wiring trough when holding a board by
hand.
Warning:
Caution:
S-19
Precautions
Safety Precautions