8.1.5 Perform Push Scan Using Jobs
4.
Place the documents on the feed tray (page 49).
•
If the output destination is a computer connected via USB:
–
When "Touch Free Scanning" is selected, scanning will start when documents are placed on the
feed tray.
–
When "Single Touch Scanning" is selected, press the Start/Stop button (
•
If the output destination is a computer connected via LAN:
–
"Touch Free Scanning" is not available.
•
Remove documents after they have been scanned.
Note
As for "Touch Free Scanning" and "Single Touch Scanning", refer to "8.1.1.14 Setting with the Scan
Button Setting Tool" (page 65).
76
) to start scanning.