By touching [Wi-Fi Protected Setup], the following items are displayed.
•
Push Button Configuration / PIN Method
Touch [Push Button Configuration] to connect the unit to the access point using the WPS button.
Touch [PIN Method] to connect the unit to the access point without using the WPS button.
USB
USB cable is connected.
USB cable is not connected.
System Counter / Scan Counter
System counter is selected. The number of documents scanned by the scanner since it
was shipped from the factory.
Scan counter is selected. The number of documents scanned during the scanning
process. The scanned quantity is cleared each time you start scanning.
Touch this icon to select the counter displayed.
6.2.3 Information display area
37