8.1.2 Scanning by selecting "Output to" and the scan settings from the home screen
8.1.2.2 Basic operations for specifying scan settings
Touch the desired setting.
•
To check or change the scan setting, touch the icon again.
The settings screen will be displayed.
–
After changing the settings, you can save them by touching the icon (
–
After changing the settings, start scanning by pressing the Start/Stop button (
values are temporarily saved at the left end of the scan settings.
These settings are cleared if you touch the home button (
•
To add an item, touch the icon (
The settings screen will be displayed. After specifying the settings, touch the icon (
72
). (Maximum 20 items)
).
). The changed
) or turn off the unit.
) to save them.