Options; Figure 61 Virtual Drive Selection; Figure 62 Tray Info; Figure 63 Usb Mass Storage Option - Acer ARMC_3P User Manual

62
Navigation Buttons
Connect/Disconnect
To establish the drive redirection press the Connect button once. If all the
settings are correct, the status bar displays that the connection has been
established, the Connect button is disabled and the Disconnect button is
enabled.
On an error, the status line shows the error message. The drive redirection
software tries to lock the local drive before it is redirected. That means that it
tries to prevent the local operating system from accessing the drive as long
as it is redirected. This may also fail, especially if a file on the drive is
currently open. In the case of a locking failure, you will be prompted if you
want to establish the connection anyhow. This should not be a serious
problem when the note above is respected. If the write support is enabled, a
drive which is not locked might be damaged by the Drive Redirection.
With the Disconnect button, a connection via Drive Redirection connection is
stopped.
Exit/Hide
If the Exit button is pressed, the Drive Redirection software is closed. If a
Drive Redirection connection is active, the connection will be closed before
the application terminates.
Using the Hide to Tray button the application is hidden, but not terminated
completely. That means that an active connection will be kept active until it is
closed explicitly. You can access the software by its tray icon. The tray icon
also shows whether a connection is established or not. A double click on the
icon shows the application window, or with a right click you may access a
small menu (see Figure 62).

Figure 61 Virtual Drive Selection

Figure 62 Tray Info

Figure 63 USB Mass Storage Option

P U G
RODUCT SER UIDE