Snmp Settings; Figure 89 Snmp Settings - Acer ARMC_3P User Manual

C 5: M O
HAPTER ENU PTIONS
• Serial number
• Firmware version
• MAC address / IP address / Netmask / Gateway of LAN interface
• Server's power state
The following actions can be initiated via SNMP:
• Reset server
• Power on/off server
• Reset the ARMC/3P
The following events are reported by the ARMC/3P via SNMP:
• Login trial at the ARMC/3P failed.
• Login trial at the ARMC/3P succeeded.
• Denying access to a particular action.
• Server was reset.
• Server was powered on/off.
The SNMP settings panel as shown in Figure 89 is described below. It allows you
to change SNMP related parameters.
Enable SNMP Agent
If this option is checked, the ARMC/3P will answer to SNMP requests.

Figure 89 SNMP Settings

99