2.2.34 TV-Out Test ....................22 2.2.35 Audio Jack test ..................24 2.3 Manual Tests ..................25 2.3.1 SIM ......................25 2.3.2 Charging via USB (Charger or Computer) ..........26 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 2(31)
Page 3
2.3.5 IR test ......................29 2.3.6 Network Test ....................30 Revision History ................31 For general information about test procedures, refer to 1220-1333: Generic Repair Manual - mechanical 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 3(31)
11. Secondary Camera 12. Notification LED 13. IR-Led 14. Microphone Back: 15. Audio Jack 16. Second Microphone 17. Camera 18. Port USB 19. Speaker 20. Flash LED 21. NFC 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 4(31)
(MS CDF) are the Services “Refurbish” and “Customize”. See also emma User Guide info. http://emma.extranet.sonyericsson.com/documents/emma_user_guide.pdf (see “Service Types” and “Aspects of large files”) 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 5(31)
For more information, refer to 1220-1333: Generic Repair Manual - mechanical The pictures to follow will show a simplified basic phone for a general visualization of the service tests! 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 6(31)
Green, Blue and Rainbow colors on the full screen. Make sure that there are no missing segments and that the colors and contrast are OK. Press Back key to return to Service Test Menu. 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 7(31)
Press Volume up/Volume down key to adjust speaker volume. Press Back key to return to Service Test Menu. 2.2.6 Stereo speaker N/A – Do not use! Press Back key to return to Service Test Menu. 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 8(31)
Check the quality by listening to the recording from the Speaker during the ‘Playing recorded sound’ phase at maximum volume. Press Back key to return to Service Test Menu. 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 9(31)
Press the Menu key or Volume keys to start the vibrator test. It is possible to modify the duration of this test. Press Back key to return to Service Test Menu. 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 10(31)
Aim the camera (located in front of the phone) at an object and check the quality of the image shown in the display. Press Back key to return to Service Test Menu. Only symbolic view 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 11(31)
Device also, when succeeded, it shows “Test Enable Bluetooth OK Searching Complete”. Devices found Test Complete Press Back key to return to Service Test Menu. XPERIA Only symbolic view 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 12(31)
Step 4: When Tag is identified, a sound will be made and an OK message will be displayed. Press the Back key two times to return to Service Test Menu. 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 13(31)
Do calibration with hand movements as shown in the phone, and then check the actual direction with measured value. (Yaw:0=North, 90=East, 180=South, 270=West) Press Back key to return to Service Test Menu. 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 14(31)
Front LEFT SIDE picture. Front VIEW BOTTOM VIEW Press Back key to return to Service Test Menu. Only symbolic view 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 15(31)
2.2.21 Ambient Light Sensor The Ambient light test states a value. Validate when, covering the Ambient Light Sensor (on the right side of the Ear Speaker), the value will decrease. 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 16(31)
5-8cm distance, the screen shall show ‘Proximity switch ON’ and change the tone (frequency). Covering with different material will give different outcome! Press Back key to return to Service Test Menu. 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 17(31)
During the actual test the text ‘Real time clock / Please wait’ is displayed, then followed by a message stating whether the test was OK or not. Press Back key to return to Service Test Menu. 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 18(31)
The DRM keys are shown in the display. There may be some different content showed based on the different market software versions. Press Back key to return to Service Test Menu. 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 19(31)
Press the Back key to return to the Service Test Menu. 2.2.31 Flip slider counter N/A. This test is not available for this product! Press the Back key to return to the Service Test Menu. 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 20(31)
Test Instructions (mech) Tests: Service Tests 2.2.32 Verify certificates N/A. 2.2.33 IrDA Test N/A. This test is not available for this product! 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 21(31)
If you get no picture on the TV- Out monitor you can try different resolutions under TV-Out Settings.) Step 1: Attach cable between phone and TV-Out; Step 2: Press ‘Play Video’. 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 22(31)
Page 23
RSEN Status: L or H (Might differ between TVs) TDMS Status: On HDCP Status: On CEC Status: Active Press the Back key to return to the Service Test Menu. 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 23(31)
Connect a Sony CTIA headset. Repeat the test of “2.2.5 Speaker”, “2.2.7 Earphone” and “2.2.8 Microphone”. Make sure that the sound from Headset earphone ports are emitted loud and clear. XPERIA 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 24(31)
Time Clock when phone is in Lock status. If not detected, the message ‘Emergency call only’ will be displayed instead in the pull down Status Bar. Press Back key to return to Standby Menu. 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 25(31)
SIM card cover, until the unit vibrates four times then release the button. Then the phone will shut down. If no vibration is detected, the battery might be discharged. Only symbolic view 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 26(31)
• Connect a USB cable from a computer to the started phone. • Verify that Data Communication works by transferring a file from Computer to phone • Erase the file Only symbolic view 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 27(31)
Unzip this file, where you find the application, installation and user guide content. The Charger and charging cable is specified. (Charger EP 800, Cable EC480) After the test the Sony Mobile Battery test.apk shall be removed by tap “Uninstall” “OK” in the application.
Go to the phone menu and open the “Remote control” app and perform a function check of IR led. Remote control app IR lens is beside the power on/off button 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 29(31)
Step 6: End the call and check that the elapsed time is displayed and that the termination is done properly. Only symbolic view 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 30(31)
Test Instructions (mech) Revision History Rev. Date Changes / Comments 2013-Feb-26 Initial release 2013-Feb-28 Information about STAMINA mode in Ch.2.1 added 1271-7725 Rev 2 Sony Mobile Communications AB – Company Internal 31(31)